Delta Tau ADVANTAGE 900 BASIC PACKAGE Manual do Utilizador Página 11

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 32
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 10
Universal Serial Operator Control Logic Board
SOCLB Hardware Configuration 7
SOCLB HARDWARE CONFIGURATION
Connections
The following tables detail the standard hardware configuration connections and several optional
hardware configuration connections for the SOCLB. The Advantage 8xx SOCLB is a true USB
(Universal Serial Bus) plug and play I/O device. If purchasing an Advantage 8xx CNC system, all the
necessary hardware settings will be properly configured.
Power Connection, J28
The SOCLB will operate properly with either +5Vdc (minimum 1 amp current) or +12vdc (minimum .75
amp current) voltage applied at J28, which uses a four-pin Molex connector. Care should be taken to
insure that the proper signal is applied to the proper pin on J28. The table below lists the J28 pin number
and the proper signal connection.
Pin Number Connection
Pin 1 +12Vdc
Pin 2 Ground
Pin 3 Ground
Pin 4 +5Vdc
J1 USB Interface Port
The SOCLB has one (1) USB B port connector and three USB A port connectors. The current SOCLB
only supports the B port connector that interfaces to the A port of the computer motherboard. Future
releases of the SOCLB will include support for the A port connectors.
USB Maximum Cable Length
The maximum cable length according to the USB Specification 1.1 for a full speed cable is 5m (~15ft).
According to the USB specification, up to five USB cables can be connected together using a hub to
create a maximum length of 30m (~98ft). In addition, to extend the length of the USB connection there
are USB active extension cables available. Although the USB active extension cables are prohibited by
the USB specification, they are known to work on some applications.
There are various USB cables available on the market today. Use only a high quality USB cable
(shielded). Using higher quality USB cables, Delta Tau has managed to operate with 10m (30ft) cables
without the use of an active extension cable or hub. However, a shorter cable is always a better choice.
When distances of greater than 10m (~30 ft.) are required, a product called USB Extend-It can be used for
up to 90m (~300 ft.)
Vista de página 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comentários a estes Manuais

Sem comentários